best paint sprayer for walls

Ultimate Guide to the Best Paint Sprayer for Walls

Sharing is caring!

Ultimate Guide to the Best Paint Sprayer for Walls

Paint sprayers can make painting walls much faster and easier than brushes and rollers, and give you smooth, even coverage. However, painting walls can be a long, frustrating job if you don’t have a high-quality paint sprayer.

A good paint sprayer for walls needs to balance high capacity to work longer but not be so heavy that you quickly tire.

It needs to be reliable and durable, with high-quality components that don’t quickly clog, leak, or spatter. And it requires a powerful motor for long, consistent paint jobs. With those things in mind, here are key points to look out for when searching for the best paint sprayer for walls.

Quick Glance

wagner spraytech control spray HVLP - WAGNER SPRAYTECH CONTROL SPRAY MAX Check Price
prostormer paint sprayer - PROSTORMER PAINT SPRAYER Check Price
graco magnum 257025 paint sprayer - GRACO MAGNUM PAINT SPRAYER Check Price
TECCPO 600 paint sprayer - TECCPO 600 WATT PAINT SPRAYER Check Price
tacklife 500 watt paint sprayer - TACKLIFE 500 WATT PAINT SPRAYER Check Price

Best Paint Sprayer for Walls: Reviews

Wagner Spraytech Control Spray Max

wagner spraytech control spray HVLP

The Wagner Control Spray Max Paint or Stain Sprayer is a convenient tool to speed up painting and staining walls and other projects. It works with thinned latex, stains, or polyurethane. It has a stationary base with a 20-foot hose, so you can fill the high-capacity cup and use the paint sprayer without making it too heavy to use.

The Wagner Spraytech Control Spray Max is solidly built, weighing 11 lbs. The turbine sits on the floor, which means less weight in the hand while spraying. With a 20 foot hose, there’s plenty of reach, and the turbine has a convenient handle, so it’s easy to move the machine as you progress. In addition, high-volume low-pressure technology effectively atomizes paints and stains for smooth, even coverage.

The Wagner Control Spray Max comes with two paint cups; a larger 1.5-quart plastic container, excellent for walls, etc., and a 1-quart metal container for smaller projects and finish-work.

An adjustment on the paint gun allows choice of round, horizontal, or vertical spray at any width between .5 and 12 inches, with little overspray.

In addition, the pressure control dial on the turbine lets you customize airflow depending on the viscosity of the paint or stain, resulting in a high-quality finish. The Wagner Control Spraymax comes with one nozzle, a 1-quart metal paint cup for finish jobs, and a 1.5-quart cup for bigger jobs.  


  • Precise control minimizes over-spray
  • Easy to clean
  • Long hose


  • Only one nozzle size

Prostormer Paint Sprayer

prostormer paint sprayer

The PROSTORMER Paint Spray Gun is a versatile machine.  Though it weighs less than 4.5 lbs., the 600-watt motor can deliver paints and stains at the rate of one liter per minute, so large walls can be painted quickly.

The unit comes with 2 paint cups, which hold 1000ml, so changing an empty for a full container is efficient. In addition, you have a choice of 3 spraying patterns – horizontal, vertical, or round. It’s a fast, easy way to quickly complete a wide range of painting jobs.

The Prostormer Paint Sprayer comes with 4 easy-to-change nozzles, suitable for different kinds of products and applications. The three smaller nozzles, 1.4mm, 1.8 mm, and 2.2 mm, are excellent for stains, varnishes, and thinned latex, while the larger 2.6 mm nozzle works well for chalk-type paint.

It has an adjustable spout width that allows you to spray circular, horizontal, or vertical spray patterns with the twist of the nozzle. The Flow Control Knob allows you to control the amount of paint or stain entering the sprayer, while the 600W motor delivers smooth, even results.

It’s easy to use, with detachable containers and simple nozzle changes and comes with everything you need to quickly and easily clean the sprayer between uses. In addition, the Prostormer comes with a cleaning brush, cleaning needle, and funnel.


  • Easy to assemble, disassemble, and clean
  • Powerful motor
  • Good range of nozzles and spray patterns for a wide range of projects


  • The manufacturer recommends not running the unit too long to prevent overheating the motor, making it less suitable for large wall painting projects.

Graco Magnum 257025 Project Painter Plus Paint Sprayer

graco magnum 257025 paint sprayer

With the Graco Magnum Project Painter Plus, water-based and oil-based paints and stains can be applied to walls with ease. The Stainless Steel Piston Pump eliminates the need to thin paints. Instead, paint or stain can be applied directly from 1- or 5-gallon buckets. 

Graco’s airless spray tip and soft spray technology increases control and reduces overspray, no matter what coating is being applied. Clogging is diminished with the RAC IV Switch Tip, which lets you simply reverse the clogged tip and keep on spraying. The compact 3/8 HP machine weighs just over 13 lbs., with a stable design with onboard storage for the spray gun, extra spray tips, and the power cord. Included is a power flush adaptor that lets you connect the sprayer to a garden hose for easy cleanup. The Graco Magnum comes with a 25-foot hose, one spray tip, pump armor storage fluid, power flush adaptor, start-up guide, and an operation manual.


  • Suitable for big wall painting jobs
  • Easy to clean
  • Limited 1-year warranty
  • 24/7 customer support


  • May be prone to leaks after extended use

TECCPO 600 Watt Paint Sprayer

TECCPO 600 paint sprayer

Handy and versatile, the TECCPO paint sprayer can be used to apply enamel, low-viscosity latex, primers, varnishes, stains, polyurethane, and even chalk and milk paints. The TECCPO Paint Sprayer not only speeds up the painting of walls but can be used to disinfect them as well. 

The TECCPO 600 Watt Paint Sprayer has a 600-watt motor that delivers 800 ml of material per minute. The high-capacity paint container holds 1300 ml, so you can keep spraying longer between refills.

Though it weighs less than 4 lbs. when full, the device is structurally strong.  TECCPO paint sprayers are drop-tested to withstand a 1.5-meter fall when full, reducing the chances of messy spills.

There are three available spray patterns – round, horizontal, and vertical – and 4 sizes of durable copper, not plastic, spray nozzles.  The system comes with a gun, viscosity testing cup, cleaning brush, air filter, cleaning needle, lid, seal gasket, and user’s manual


  • A larger capacity paint cup saves time
  • Easy to assemble
  • Durable
  • It can be used to spray disinfectant water on walls


  • Some people may find it hard to clean

Tacklife Paint Sprayer with 500 Watt High Power Electric Spray Paint Gun

tacklife 500 watt paint sprayer

The Tacklife High Power Electric Spray Paint Gun delivers ease of use for paint jobs inside and outside the house. You can adjust the spray width and the pattern with a handy control on the front of the gun. 

The Tacklife comes with three copper nozzles, which are more durable than plastic nozzles. They allow the sprayer to be adapted quickly to different materials such as sealers, varnishes, latex, chalk, and milk paints.

The Tacklife Paint Sprayer has a 500-watt motor that is powerful enough to apply 1,100 ml per minute. With that much power, less thinning may be required, and thicker paint can be applied than other models.

The gun itself has a soft rubber grip, so it’s easy to hold. The solidly built unit weighs less than 14 lbs. With most of the weight resting on 4 swivel caster wheels, the machine can be locked in place or unlocked to follow you. With 11 feet of hose, there’s plenty of room to reach long walls.

A retractable handle makes it easy to move the sprayer, and the whole compact unit stores neatly when not in use. In addition, the Tacklife comes with 2-1,200ml paint reservoirs. These convenient reservoirs are designed so they can be efficiently refilled without detaching them from the paint gun.


  • The powerful motor requires less paint thinning
  • The unit moves easily with you as you work
  • Good for big jobs
  • Convenient, well-designed unit
  • Can refill the paint reservoirs without detaching them from the sprayer


  • Some plastic parts may be fragile

Buyer’s Guide

When considering a paint sprayer for your walls, there are several essential features and capabilities to keep in mind. Here are the key things to look for.

Paint Sprayer Type

There are three different types of paint sprayers. Each one works differently, and each has different advantages. Here are the three paint sprayer types:


An airless paint sprayer uses an electric pump to propel paint through the sprayer. The motor creates pressure in the reservoir, which forces paint through the tip of the sprayer.


  • Can be used to paint directly from a paint bucket, rather than transferring paint to a sprayer container, so they are a good option for large jobs
  • Can be used with thicker paints


Reduced pressure creates an increased risk of drift or overspray, causing more wastage

Compressed Air

As you might imagine, a compressed air paint sprayer requires an air compressor and works much like a traditional airbrush. The compressor uses high-pressure air to propel paint through the sprayer. A regulator controls the amount of airflow, so you can adjust the pressure needed for each specific task.


  • Easy to use and control for smooth, even results
  • Customizing airflow directs more paint specifically where needed, with less overspray


Requires an air compressor, which can be loud and cumbersome to work with


The best-compressed air paint sprayers are LVLP (low-volume, low-pressure) sprayers, which have reduced pressure for increased safety and handle higher viscosity paints. There are two types of LVLP paint sprayers:


Like a traditional airbrush, these sprayers have a hopper above the nozzle. Paint naturally flows downward by gravity and is propelled through the nozzle. They are better for small jobs where smoothness and precision are needed and work with minimal waste.

However, the need for the spray gun to always be held upright reduces their versatility for jobs like walls, ceilings, and other painting tasks where you may need to position the sprayer in a variety of angles.

Siphon Fed

With a siphon-fed paint sprayer, the force of the air draws paint out of a reservoir and into the nozzle. They require more pressure to create and maintain this vacuum flow. Siphon-fed sprayers are easier to use for large jobs since they can use a more extensive reservoir and allow for a broader range of movement. However, they can also be less accurate because compressed air is being used to control the paint flow and atomize it.


HVLP stands for “high-volume, low-pressure.” HVLP paint sprayers have an internal compressor or turbine that uses a steady stream of low-pressure air to propel paint through the sprayer. Like compressor sprayer types, the airflow can usually be adjusted for different painting jobs. 


  • Low-pressure air is easier to control, reducing mess and waste
  • Safer than high-pressure paint systems


Requires thinner paints, which can limit the types of jobs this sprayer is suitable for or need more coats for complete coverage 

Paint Types

As you can see, not all sprayers are compatible with all types of paint. If you are already committed to a certain style of paint for your walls, you need to choose a compatible sprayer.

However, if you want a sprayer that not only works on walls but can also be used for a variety of jobs around the house, it’s essential to know what types of paint you can use and how much thinning may be required. Here’s a brief overview of what types of paint you can use with a sprayer:


Latex paints are popular for walls because they are durable, high coverage, and fast-drying. However, almost all latex paints will need to be thinned for use in a paint sprayer, depending on the sprayer type.

Oil-Based Paints

Oil-based paints are exceptionally durable and stain-resistant, so they are an excellent choice for high-contact areas like moldings and trim. However, like latex, oil-based paints usually need to be thinned before spraying.

Stains and Varnishes

Most stains and varnishes can be used in a paint sprayer. Stains can be thinned to create no-wipe stains perfect for spraying without rubbing or wiping. However, beware of over-thinning stains and varnishes because very thin coats may dry too fast, creating an uneven finish.

Chalk and Milk Paint

Many people are using chalk and milk paints on furniture and décor projects, and they can easily be used with a paint sprayer. Depending on your type of sprayer, you may be able to use these paints without thinning them.

Other Types of Paint

Depending on your paint sprayer type, you may also be able to use acrylic, urethanes, automotive, and other kinds of paint.  

Coverage Area

A typical container of house paint indicates on the label how many square feet of surface area that container can cover. However, those labels are all designed for use with paintbrushes or rolling.

Sprayers require more paint for the same coverage area due to overspray and atomization. Exactly how much more color is needed for the same coverage area is challenging to calculate. It depends on the type of sprayer, nozzles and spray patterns used, distance from the painting surface, and simple variations in a user’s skill and technique.

To calculate your coverage area more precisely, purchase a small container of your intended paint and note the manufacturer’s coverage area. Next, apply the paint with your sprayer and note the difference; then, use that difference to calculate your paint needs for the entire project.

Flexible Suction

Painting walls can be a big job, with lots of area to cover. In most cases, you want to use a paint sprayer to make wall painting faster. For that reason, you don’t want a paint sprayer with a small, gravity-fed cup or even a small paint container attached to the gun, so you don’t waste time constantly refilling the sprayer.

Instead, look for a paint sprayer that creates a vacuum and siphons paint directly from your paint can or bucket to minimize refills. It’s also a great idea to choose a paint sprayer with flexible suction, so you can customize your air and material flow to get the best results for your needs.

Motor Power

Motor power in a paint sprayer indicates how much airflow and pressure can move through the system, the sprayer’s ability to manage thicker and more viscous paints like exterior paints, and can also be an indicator of how durable and reliable a paint sprayer can be.

Most home users who will use a paint sprayer for small jobs like furniture or cabinet finishing do not require a powerful motor. However, for big jobs like large interior wall painting or for use over the years in a wide range of projects, choose a powerful motor that will speed up your work and last longer.  


Are Paint Sprayers Suitable for Interior Walls?

Generally speaking, paint sprayers require much more preparation in masking, sheeting, and cleaning the area, because they create overspray and project paint particles into the air. Brushing and rolling can often have quicker preparation and setup.

However, with proper use and preparation, paint sprayers give you much more even, consistent, smooth results without brush or roller marks.

Is it Better to Spray or Roll Walls?

The better choice depends on your goals for your interior walls. Rolling or brushing interior paint often requires less prep time and is more economical because it uses less paint. If you have skill and practice, you can achieve smooth, consistent wall coverage with a paint roller.

On the other hand, if you are willing to spend time preparing and masking, a paint sprayer lets you cover large wall areas more quickly, evenly, and consistently than a typical brush or roller. If you are only painting a small room or accent wall, you may feel that a roller is simply more convenient.

However, if you want to cover a lot of square footage of wall space, and want a smooth, even appearance over the whole area, a sprayer is probably a better choice.

Does a Paint Sprayer Use More Paint Than a Roller?

Yes, a paint sprayer uses more paint than a roller. A paint sprayer atomizes paint, mixing it with air to make a fine spray. This means that there will always be some paint that is ‘lost’ in the air and doesn’t land on your painted surface. Experts estimate that it takes roughly a third more paint to use a sprayer than a roller.

How Do Paint Sprayers for Walls Work?

Paint sprayers draw paint into the system and then mix it with pressurized air to propel it out of the nozzle. As the paint is forced through the tip, it becomes “atomized” – broken into tiny droplets of paint carried in the airflow. These tiny droplets of paint land on a surface, creating a thin, even layer of paint.

Because the paint is never brushed, rolled, or touched during the process, the paint layer can dry very smoothly without any brush or roller marks.


Painting walls is a big, time-consuming job, and it can be difficult for a nonprofessional to achieve even and consistent results. It’s simply hard on a person to perform perfect, identical body movements over and over along the entire surface of a wall.

All too often, after the paint dries or as the light changes in a room, you can see streaks, patches, or brush marks. A paint sprayer allows you to speed up large painting jobs and create smooth, even coverage, making it a great way to paint interior walls.

Are you looking to paint furniture or perhaps kitchen cabinets. I review the best products for each application here. Enjoy!

Don’t forget to visit me on Facebook and share your paint sprayer DIY project ideas, experiences and more.

Leave a Comment

Your email address will not be published. Required fields are marked *